®
RCI Series Menu
RCI Series Load Bank Installation Guidelines
Instructions
Mounting:The SmartLoad load bank is supplied as an insert unit, designed to fit into the duct take-off or inserted into an adaptor frame, sized to fit the radiator.
Determine the best position on the radiator for mounting the SmartLoad i.e. left hand, right hand etc. Do not mount with Control unit to the top. Mounting in a horizontal position is acceptable however, only for indoor applications
Cut a rectangular hole in the ductwork or radiator adaptor to the dimension specified for the model selected.
Mark and drill mounting holes into the duct to suit the load bank flange. Reinforce the duct if necessary with an angle frame. Large load banks may also need internal foot support to assist with the insertion of the unit.
Location of the control box must be outside the radiator area and must be well ventlited.

Specifications and information subject to change without notice. E & OE

© Copyright 1995-2008 SEPHCO ® Industries Pty. Ltd. All Rights Reserved.