 |
|
| SEPHCO RCI Series Smartload Bank Description |
|
|
SEPHCO universal mounting
SmartLoad banks, are designed for direct mounting onto radiators
or inserting into cooling ducts. A must for all genset loading and auto loading
applications. |
|
|
|
| Four Control Options |
 |
Digital Touch Control - for
manual load selection |
|
Auto Minimum Load Control
- for maintaining preset minimum genset loads |
|
Economical Manual Load Selection |
|
Remote Control - for manual
loading and exercising |
|
|
 |
|
|
|
SEPHCO RCI SmartLoad's
are manufactured in a range of sizes to cater for a wide range
of
power capacities. The standard design concept ensures total reliability and performance
for
years of operation. |
|
|
|
| SEPHCO SmartLoad Features |
|
| |
|
|
| All structural parts,
frames, resistor supports are 16 gauge zinc-coated
steel . All screws, nuts and bolts are of #316 stainless
steel. Painting of metal surfaces is two-pack polyurethane
marine enamel. |
|
|
|
|
| SmartLoad's are designed
for outdoor use, totally weather proofed to IP65 / NEMA
3R, (hose proof) incorporating stainless steel type immersion
proof resistors. The unique design of the SEPHCO load bank,
ensures complete resistance to water and moisture buildup. |
|
|
|
|
| All metal panels are
pretreated prior to fabrication with a hot zinc coating
process. Final painting and finish utilizes a triple coat
of two pack polyurethane marine enamel. Metal structures
such as load bank chassis, resistor supports and lifting
bars are hot dipped galvanized. External screws and bolts
are #316 stainless steel. |
|
|
|
| Load resistors are SEPHCO
type SDL stainless steel finned, incoloy sheath type, fully
moisture sealed and constructed to NEMA 6. Resistors are
calibrated to within 5% of their rated value and tested
to 2kV. Resistor connections are in light gauge nickel-plated
copper busbars in groups of 50kW maximum, arranged to minimize
strain on resistor terminals. All connections of resistor
groups are made using 300° F rated, multi stranded
flexible cable. |
|
|
|
| Switchgear and Auxiliaries |
| SmartLoad's are made
up balanced three phase load groups, switched by contactors
and protected by circuit breakers. Safety interlock devises
are provided for monitoring of the cooling airflow. |
|
|
|
|
|
Specifications and information subject
to change without notice. E & OE
© Copyright 1995-2006 SEPHCO ® Industries Pty.
Ltd. All Rights Reserved.
|
|
|
