 |
|
SEPHCO LC12D Controller |
| |
|
| SEPHCO Remote Auto Controller
with Data Logging |
The LC12D controller
is a computerized processor capable of controlling a
series of load banks or inductive loads for variable
power factor loading. Operating features include a four-line
display screen with simple step-by-step instruction prompts,
display of load values such as kW, V, Hz, Amps and load
time. Choice of operation includes manual and automatic
modes. The automatic loading feature enables loading
routines with time duration and pause override function.
Changes to the load routine such as load size and time
can be edited any time during the test routine from the
pause function key. Auto tuning makes load-correction
in the event of any voltage or resistance fluctuation.
The LC12D controller ensures that the load bank is fully
protected against over voltage or frequency threshold,
interrupting the test to proceed. All functions are fully
displayed including warning messages such as voltage
exceeded, frequency incorrectly set, emergency stop,
cooling failure and load bank identification, load bank
off-line and confirmation of load banks connected.
Optional connection to a PC or Laptop for remote on-line
graphic display of actual load test. Choice of operational
settings of voltage, frequency and power factor to suit
generator to be tested. Test routines held in memory
for repeated use. Test selection can be done in kW or
in kVa @ 0.3 -1.0PF. Load test can be printed from the
serial port connection during the testing process, print
intervals is programmable from one minute to four hours. |
|
|
|
